Sleep and Suspend power management modes are supported. Delay 4 Sec, Instant-Off default. Enabled default , Disabled. If this function is enabled and an attempt is made to write to the boot sector, BIOS will display a warning message on the screen and sound an alarm beep. All the CMOS data will be loaded as defaults setting. It also coordinates communications with the PCI bus. These configurations are factory settings optimized for this system.
|Date Added:||25 July 2014|
|File Size:||28.81 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Enabled default Enable cache. Off defaultOn, Former-Sts. However, this function is strongly recommended not to use. Full-duplex mode permits simultaneous two-direction transmission. During Disabled, you cannot use miicro function.
Wait for five seconds. If the signal has been triggered, it will record to the CMOS and show the message on next boot-up. The BIOS has been recovered and will work properly.
System will boo-up to DOS prompt. Power After Soound Fail This setting specifies whether your system will reboot after a power fail or interrupts occurs.
Fast gives faster performance; and Slow gives more stable performance. Indicator light on keyboard does not turn on. If you have change the setting, you must let the system boot up until it goes to the operating system, before this function will work.
When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again. Suspend Mode When enabled and after the set time of system inactivity, all devices except the CPU will be shut off.
The default settings that came with your system have been optimized and therefore should not be changed unless you are suspicious that the settings have been changed incorrectly. Supports Intel Hyper-Threading Technology. This action will boot-up the system according to FSB of the processor.
Does not support Willamette CPU.
Mainboard Driver: Biostar GV Micro Ver. 7.x
Hardware Monitor Panel Click the Hardware Monitor button in Main Panel, the button will be highlighted and the Hardware Monitor panel will slide out to left as the following figure. Former-Sts Restores the system to the status before power failure or interrupt occurs. Manual Aside from the paperback manual, we also provide manual in the Driver CD.
865g Main Menu allows you to select from several setup functions.
Biostar 865GV Micro 478 Owner’s Manual
System does not boot from hard disk 1. Suspend Type Sounc the Suspend Type. However, if any program writes to this memory area, a system error may result.
A confirmation message will be displayed before defaults are set. You 47 need Acrobat Reader to open the manual file. SATA is operating in legacy mode. However, the color information coming from the VGA controller is drawn from the palette table inside the VGA controller to generate the proper colors, and the graphic controller needs to know what is in the palette of the VGA controller.
The setup guide will list the compatible driver for your motherboard and operating system. On default Numpad is number keys. Blank Screen This option only writes blanks to the video buffer. Let user select a restoring way if system need to do a fail-safe reboot. Pop up the following dialog. Confirmation message will be displayed before proceeding.